Solar Sun Rings Pool Heaters

Solar Sun Ring Features

• Solar Sun Rings are not just a solar cover they are a solar heating system
• Solar Sun Rings produce 21,500 BTU per Ring per day - that is the same heat produced by Solar Panels but at a fraction of the cost 
• Solar Sun Rings are safer to use than normal solar covers: - greatly reduces chance of entrapment
• Solar Sun Rings can be left on when using an automatic pool cleaner, unlike solar covers
• Solar Sun Rings helps stop the build up of yellow algae (phaeophyta)
• Solar Sun Rings look fantastic
• Solar Sun Rings are easy to take of the pool owing to their patented magnetic rafting design. Easily quickly installed or removed by one person.
• Solar Sun Rings are a must for your swimming pool in the UK because of their excellent heat generation and retention properties
• Solar Sun Rings are perfect for your swimming pool abroad because they are easy to take with you in a suitcase

Every now and then a new product hits the market that just blows away all of the competition. Solar Sun Rings is just that product.

How Do Solar Sun Rings Work?
The Top Blue Layer absorbs 50% of the sunlight and converts that into heat, the other 50% is allowed to pass through for deep water heating.

Each Solar Sun Ring can produce over 21,000 BTU per day giving an output of 1070 BTU per sq ft. A top of the range Swimming Pool Solar Heater will only produce 1000 BTU per square foot of collector and you still need a solar cover is still to conserve the heat at night.

How Do I Remove The Solar Sun Rings From My Swimming Pool?
Each Solar Sun Ring has six magnets around its circumference that connect to other Solar Sun Rings to automatically form a raft. These magnets create a strong enough bond to allow easy removal of the Solar Sun Rings in one complete raft by one person.

How Many Solar Sun Rings Will I Need?
Please see the chart below for your size pool.

Why Are Solar Sun Rings Safer Than A Solar Cover?
One of the biggest fears for any pool owner is the worry of a child or a pet drowning. No other floating solar cover matches Solar Sun Rings design for safety. Countless pets and many people have died because of entrapment with the one-piece solar covers. The primary design criteria of Solar Sun Rings was to prevent entrapment.  With the Solar Sun Rings they are held together in a raft by six magnets that will hold the solar sun rings as a single raft on the pool but the Solar Sun Rings will pull apart if any thing falls in allowing easy access to the side of the pool and safety.

Solar Sun Rings may be used on all chlorine or salt water system pools, whether in ground or above ground.If loads of FREE HEAT for your swimming pool is what you require then Solar Sun Rings are for you.

How Do I Clean My Solar Sun Rings?
After removal from the swimming pool Solar Sun Rings can be easily cleaned with a sponge and mild detergent solution.

Solar Sun Rings Help Your Pool Stay Clean
Your pool requires some direct sunlight and open water to stay healthy. The open water around the raft of Solar Sun Rings and the triangle caused by the convergence of three Solar Sun Rings is by design. These open areas allow your pool to receive some direct sunlight. This sunlight will greatly reduce the incidence of both mustard algae and increased alkalinity.

INSTRUCTIONS FOR USE:

PROPER INFLATION IS NECESSARY TO USE THIS PRODUCT

INFLATION

Inner Grid:
The inner grid should be inflated orally with about two large breaths of air for an average person. Do not use more air, two breaths is all that is needed. Close the valve. Bunch up the SSR and move the contained air around to separate both layers of plastic. The SSR cannot be made to lie flat unless the layers are separated. The SSR should be about the size of a soccer ball when bunched up.

Outer Ring:
Inflate the outer ring orally until it is firm. Close the valve. Place each SSR single layer in direct sunlight on a flat non-abrasive surface until the packing lines relax. This should take from 30 minutes to 3 hours depending on the intensity of the sun. If the SSR does not lie flat after the packing lines are relaxed, examine the SSR for areas not separated. If the SSR still does not lie flat measure the diameter. A properly inflated SSR is 59 inches or 149.86cm in diameter. If the SSR is smaller use the deflation tube provided to let air out of the inner grid until it lies flat. Excessive air in the grid section, deep packing lines and failure to separate both layers of plastic will all cause the outer edge to curl and distort.

HOW TO USE THE SOLAR SUN RINGS

HEATING: Once the Solar Sun Rings are inflated, cover up to 70% to 80% of the surface of your pool with Solar Sun Rings by placing the blue coloured side on the water. You should cover no more than 70% of the surface on deep pools and not more than 80% on shallow pools. For the best solar effect, keep the upper surface of the Solar Sun Rings clean and clear.

COOLING: Turn the Solar Sun Rings over so the blue side is up. The Solar Sun Rings do not heat water efficiently when upside down.

WATER AND CHEMICAL SAVING: Neither water nor chemicals can evaporate through the two layers of heavyweight vinyl. You will save on water and chemicals about equal to the actual percentage of water covered.

CARE OF SOLAR SUN RINGS

CARE: Once inflated proper care of this product will greatly extend its useful life. Pool decking is designed to be abrasive to prevent slips and falls. Do not walk on Solar Sun Rings or drag Solar Sun Rings on this abrasive surface. When Solar Sun Rings are not on the pool water do not stack them in direct sunlight, excessive internal temperatures will develop and melt the vinyl films.
Solar Sun Rings are passive pool heating devices and should not be used as pool toys.