9kw Swimming pool heat pump

Installation adjustments
Selecting the installation site
– Install the heat pump at a site with a large space and good ventilation.
– This position must ensure smooth air evacuation (the air inlet location is obvious from the scheme
on the next page).
– Place the heat pump near a channel or vent hole to facilitate water drainage.
– The foundation base or bracket must provide sufficient strength to ensure smooth operation of
the equipment.
– Ensure that the equipment is in a vertical position without an incline, after it has been installed.
– Do not install the equipment where pollution, contaminants or corrosive gases are present or where
impurities or fallen leaves usually gather.
– The installation site must not be located in the vicinity of a flammable or explosive environment with
regular hazard of fire.
– Adhere to a minimum 2 m distance from obstacles.